Details:
Serviceability
- Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
- Disconnected battery notification
Warns when a battery is not available to provide backup power.
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Provides notification of changing utility power and UPS power conditions
- User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Manageability
Provides management of the UPS via a serial port.
Customize UPS capabilities with management cards.
Quickly understand unit and power status with visual indicators.
Provides remote power management of the UPS over the network.
- InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
Protection
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
- Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
Provides temporary battery power when the utility power is out.
- Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Protects connected loads from surges, spikes, lightning, and other power disturbances.
- Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Adaptability
- Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.
- Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Availability
- Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
- Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
- Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
- Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Allows additional run time to be quickly added as needed.
Specifications:
Output
- Output power capacity: 2.7 KWatts / 3.0 kVA
- Max Configurable Power (Watts): 2.7 KWatts / 3.0 kVA
- Nominal Output Voltage: 230V
- Output Voltage Note: Configurable for 220: 230 or 240 nominal output voltage
- Output Voltage Distortion: Less than 2%
- Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
- Other Output Voltages: 220, 240
- Load Crest Factor: 3: 1
- Topology: Double Conversion Online
- Waveform type: Sine wave
- Output Connections:
- (8) IEC 320 C13 (Battery Backup)
- (2) IEC 320 C19 (Battery Backup)
- Bypass: Internal Bypass (Automatic and Manual)
Input
- Nominal Input Voltage: 230V
- Input frequency: 40 - 70 Hz (auto sensing)
- Input Connections: British BS1363A, IEC-320 C20, Schuko CEE 7/EU1-16P
- Cord Length: 2.44 meters
- Input voltage range for main operations: 160 - 275 V
- Input voltage adjustable range for mains operation: 100 - 275 (half load) V
- Number of Power Cords: 3
- Other Input Voltages: 220, 240
Batteries & Runtime
- Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte: leakproof
- Typical recharge time: 3 hour(s)
- Replacement Battery: APCRBC152
- RBC Quantity: 1
- Extendable Run Time: 1
- Battery Volt-Amp-Hour Capacity: 505
- Extended Run Options: APC-Smart-UPS-SRT-3000VA-230V
- Runtime
- View Runtime Graph
- View Runtime Chart
- EfficiencyView: Efficiency Graph
Communications & Management
- Interface Port(s): RJ-45 Serial, Smart-Slot, USB
- Control panel: Multi-function LCD status and control console
- Audible Alarm: Audible and visible alarms prioritized by severity
- Emergency Power Off (EPO): Yes
- Available SmartSlot™ Interface Quantity: 1
Surge Protection and Filtering
- Surge energy rating: 340 Joules
- Filtering: --
Physical
- Maximum Height: 432 mm, 43.2 cm
- Maximum Width: 85 mm, 8.5 cm
- Maximum Depth: 635 mm, 63.5 cm
- Net Weight: 31.3 kg
- Shipping weight: 36.74 kg
- Shipping Height: 246 mm, 24.6 cm
- Shipping Width: 599 mm, 59.9 cm
- Shipping Depth: 871 mm, 87.1 cm
- Color: Black
- Units per Pallet: 6.0
Environmental
- Operating Environment: 0 - 40 °C
- Operating Relative Humidity: 0 - 95% no %
- Operating Elevation: 0-3000 meters
- Storage Temperature: -15 - 45 °C
- Storage Relative Humidity: 0 - 95% no %
- Storage Elevation: 0-15000 meters
- Audible noise at 1 meter from surface of unit: 55.0 dBA
- Online thermal dissipation: 703.0 BTU/hr
- Protection Class: IP 20
Conformance
- Approvals: CE, CE Mark, EAC, EN/IEC 62040-1, EN/IEC 62040-2, ENERGY STAR (EU), RCM, VDE
- Standard warranty: 3 years repair or replace (excluding battery) and 2 years for battery